LASER 200-QS

WINGSPAN: 80 inches          FUSELAGE LENGTH: 59 inches          WING AREA: 890 square inches

WEIGHT: 13 lbs.          POWER: Super Tigre 2500 - 3000

The Laser 200 is one of the earlier aerobatic aircraft that lead to the modern high performance airplanes like the Extra 300.  Although it might be considered 'passe' by some Lou Loudenslager is still putting on an awesome performance at air shows around the country.  Our accurate Quarter Scale model of this outstanding aircraft has the same exciting aerobatic capability of the full-scale airplane.  The quick building kit includes a lighweight composite epoxyglass fuselage with integral fin.  Access to the radio is through a seperate epoxy hatch which also holds the clear canopy.  The finely sanded balsa sheeted foam core plug-in wings, with the long cut for the ailerons done at the factory and holes pre-drilled for the aluminum alloy wing tube, are ready for covering in just a few hours.  The balsa sheeted foam core stabilizer fits into fairing molded in the fuselage reducing the time spent in the alignment procedure.  The aircraft alloy landing gear with epoxyglass wheel pants bolts to the bottom of the fuselage.  Although many of our Laser 200 kits are flown with large gas engines we recommend the MOKI 1.8 or Super Tigre 3000 for maximum performance.

MADE ENTIRELY IN THE USA BY TENNESSEE CRAFTSMEN

For full details of this model & other ARF Kits available e-mail, call or write to:

Tennessee Model Products
P.O. Box 5776
Oak Ridge, Tennessee  37831
Technical Information 865-482-6188